Dang Coiling

Knowledge of the industry: Fabric Printing defects Terminology

Wang Dang default (Barre) - knitting, this defect is characterized by the fabric or canvas horizontal row generally a certain pattern tread. Yarn tension over uneven and unequal dye yarn with an affinity different and may be the reason for this situation.

Wrong way (wrong place) - For those difficult to describe defects in material, this term is very convenient. The term is generally used to describe those who have been severely damaged areas weaving.

Twill defect (Bias) (reference angle) - on the tissues, default refers to the size the deviation of weft and warp occurs when, on knitted fabrics, this case refers to the vertical line of fabrics and influences the size consecutive areas of tissue occurs ramp.

Speckled defects (defects Birdseye) - On the knitting is concerned, this means sometimes erratic and seems contrary to the design fabric tuck Organization.

Arcs (Arc) - On the woven fabric, this means that the frame to form the arc in the direction of the width of the fabric of knit, this means that the coil lines to form the arc in the direction of the width tissue.

Decapitation defects (broken end) - This defect refers to the chain after fracture and after repairing the place, its characteristics can be seen in the tissue in which the rupture.

Wrong color pattern defects (broken color model) - On the fabric, the pattern of this case refers to the discontinuity in the use of the machine silk weaving with color pattern described in the frame when the repair of mistake or error of the trade when the image fills the channel after re-set incorrectly can cause the formation of such defects, knitting, this is changing by the error of the tube shuttle generated.

Broken filling defect (pick off) - This means that, due to the width of the fabric fault frame is missing a portion of the frame.

Scratch default (blue) - (see the defects of lateral support) - This is: As the courses have been woven fabric or yarn eventually wear resulting in loss of fiber sense of direction and lead to a distortion of the appearance of the fabric.

Spots default (bramble brand) - This is the result of certain substances in excessive strain caused by these substances, including the lines pass wool, waste, and uses the tool patch to remove the veil floating.

Failure to board suspended (selvage buttonhole) - This is a woven fabric defects board, replacing the weft yarn before weaving shuttle on the accumulation of excessive tension is caused by such defects. This tension tends to limit the edge of frame right off and staggered, creating a defect similar to a buttonhole.

Son of abrasion (Yarn chafed) - A defect that is subject to wear the wire, the wire will be paid after the loss of sense of direction and to the distortion son of fibers. This deficiency affects the color of the wire can be, and often lead to radial flowers article or the generation of zonal streaks.

Fragmentation frame (ground filling) - This fault is generated by imbalances weft, characterized by the existence a manifesto or a specific model and the model by drawing rolls caused by the eccentric behavior.

Defect Hole (Clip brand) - This fault is not infected with colorful fabrics, where the production of this defect is due to clip the edge of the metal in the tissue caused by a small clip, clip a small part of these amendments in order to avoid or stain fabrics and sales selvage use.

Gross default (coarse End) - This means there is a chain diameter is significantly larger than the diameter of the channel normal tissues.

Coarse pattern defects (Pick coarse) - This means there is a frame is significantly larger than the diameter of the normal diameter of frame material.

Defects Coarse Thread (Coarse thread) - It means that the wire has a diameter larger than the fabric to the wire diameter normal.

Fabric wrinkle defects (Cock fabric conduit) - On the knitting, this defect is, those with wrinkles, reduce or swell only can not be flat in the fabric cutting table. Reason for this may be due to the deformation of the wire, without rules, it can be due to thread tension in the process of knitting is not balanced, it may be due to the cloth wire finish in the degree of heterogeneity response.

Defects over Kink (curled Yarn) - This is a number of fibers in the root of the thread seem too curly and not tell the direction of the fibers. Produce this situation is due to a number of fiber son is too long on the roll of drawing, leading to the first version of a roll of drawings before and after the fibers have been drawing on the fibers of a pair of rollers, and so fiber break and curl. Son of the elbow in the fabric looks like a little twist.

About the Author

I am China Manufacturers writer, reports some information about rubber bath toys , chinese checkers board.

Wu Dang Coiling Dragon Style (Pan Long Men)